CASES

      DC geared motors adopt serialized and modular design ideas, have wide adaptability, and are widely used in the industrial field. Many people wonder why DC reduction motors are so widely used. To solve everyone's doubts, the following is a detailed overview starting from the advantages of DC reduction motors: 1. DC reduction motors have low energy consumption, superior performance, and the reduction motor efficiency is as high as 95% or more. 2. DC reduction motors have low vibration, low noise, high energy saving, and use high-quality section steel materials, rigid cast iron housing, and high-frequency heat treatment on the gear surface. 3. DC reduction motors are manufactured in accordance with international technical requirements and have high technological content 4. DC reduction motors save space, are reliable and durable, and have high overload capacity. The power can reach more than 95KW 5. DC reduction motors are precision-processed to ensure positioning accuracy. All of this constitutes the gear reduction motor of the gear transmission assembly. It is equipped with various motors to form a mechatronics, which fully guarantees the product's quality

The bearings of the gear motor will be worn during operation, but there is a limit to its wear, otherwise it will not work normally. Among them, the needle bearing and seat hole wear, the meshing gear seat hole and the needle bearing and the shaft neck should have a clearance of 0.01-0.08mm, and the meshing gear shaft neck is usually meshed. If it exceeds this range, it needs to be replaced immediately. If the tooth surface shows uniform wear, the wear along the tooth length direction should not exceed 30% of the original tooth length, the tooth thickness should not exceed 0.40, the gear meshing area should not be less than 2/3 of the tooth surface, the running gear meshing clearance should generally be 0.15-0.26mm, and the gear wear transmission gear is under normal working conditions. The use limit is 0.80mm, the meshing clearance of the engaging gear should be 0.10-0.15mm, and the use limit is 0.60mm. It can be measured with a dial indicator or soft metal rolling method. If the clearance is exceeded, it should be replaced in pairs. Mainly due to the gear meshing clearance not meeting the requirements, 2 gear tooth broken gear tooth broken. The gear tooth meshing position is improper or it is subjected to a large impact load during operation. If there is a small breakage of no more than 2mm on the edge of the gear tooth, it can be repaired with an oilstone and continued to be used.

Introduction to gear motor:   Gear motor refers to the integration of reduction gear and motor (motor). This integration can also be called gear motor or gear motor. It is usually integrated and assembled by professional reduction gear manufacturers and supplied as a set. Reduction motors are widely used in the steel industry, machinery industry, etc. The advantages of using reduction motors are simplified design and space saving.   Overview of reduction motor   1. Save space, reliable and durable, high overload capacity, power can reach more than 95KW. 2. The gear motor is manufactured in accordance with international technical requirements and has a high technological content. 3. The product adopts the design concept of serialization and plate-based, and has a wide range of adaptability. This series of products has a wide range of motor combinations, installation positions and structural solutions, and can choose any speed and various structural forms according to actual needs. 4. Small vibration, low noise, high power saving, use of high-quality segment steel materials, rigid cast iron housing, and high-frequency heat treatment of the gear surface. 5. After precision machining to ensure positioning accuracy, all of this constitutes the gear reduction motor of the gear transmission assembly equipped with various motors, forming a mechatronics, which fully guarantees the quality characteristics of product use. 5. Low energy consumption, superior performance, and the reducer efficiency is as high as 95% or more.   Classification of reduction motors 1. Coaxial helical gear motor 2. Spiral bevel gear motor 3. High-power gear motor 4. YCJ series g gear motor 5. Parallel shaft helical gear reduction motor   Application of gear motors   Widely used in the reduction transmission mechanism of various general mechanical equipment such as metallurgy, mining, lifting, transportation, cement, construction, chemical industry, textile, printing and dyeing, and pharmaceuticals.